MV-805 IP Multiviewer User Manual
Source Spigot Template
RollCall Templates 6.8
Issue1 Revision 1
Page 73
© 2018 SAM
6.8 Source Spigot Template
The RollCall
Source Spigot
template (Figure 45) allows a user to manually specify the details
of each video multicast IP stream
from
the MV-805 spigots (i.e. from the source spigots
providing the video wall display output video IP streams).
MV-805 output (source) spigots are typically connected to ‘source ports’ of an IP router.
For each multiviewer source spigot, two flows are supported:
•
Video
and
Audio
.
For each flow, the template has the following sections:
•
Current:
Shows information about the current IP stream originating from the spigot.
•
New:
Allows a user to enter new IP stream details.
Each section has a
Primary
and
Secondary
sub-section, which are for redundant flows.
Once new IP stream information is entered, a
Take
button appears at the bottom of the
window (see Figure 45b). Click
Take
to apply the new IP stream settings.
Figure 45 RollCall Source Spigot
Select
Spigot
TAKE
(Button appears after a
change has been made in
the Multicast Flow details.)
New Multicast Flow
details
Information used in IP flow
in extended RTP headers.
