MV-805 IP Multiviewer User Manual
On-screen Input Status Information Lines
Getting Started 3 - Design/Layout of Video Wall (Orbit) 9.5
Issue1 Revision 1
Page 120
© 2018 SAM
9.5 On-screen Input Status Information Lines
It can be useful to see video input status shown on each video tile of a video wall. See
Figure 100. This can be set up with SAM Orbit by enabling the display of lines of information
on a video widget and specifying the information source for each line. See the Orbit for
Multiviewers User Manual, Section 11.3 “On-Screen Video Input Status”.
Various status information can be displayed. In Figure 100, the lines of status information
show information about the video input:
•
Video resolution standard.
•
Video IP flow type.
•
Bit rate.
•
IP address of the edge device sourcing the IP stream.
•
IP address of the multicast video IP stream.
•
IP port number of the MV-805 input (i.e. the destination device).
Figure 100 On-screen Input Status Information
On-screen Input Status information
