MV-805 IP Multiviewer User Manual
Initial MV-805 Unit Configuration with RollCall
Getting Started 1 - Unit Settings (RollCall Template) 7.2
Issue1 Revision 1
Page 82
© 2018 SAM
7.2.2 Setting Up the Control Network Interface(s)
In the
Network Settings
section of the System-Setup template:
4.
In the
Interface
drop-down menu, select the
“Control”
network interface.
This has selected the “Control” network. The settings in the Network Settings section apply to
the selected interface.
5.
With the “Control” network selected, enter the settings for the interface and press
S
to
save each locally. Settings include:
6.
If a second control interface is required,
this may be set up in a similar way. (i.e. Select “Control 2” in the Interface drop-down
menu and enter settings for the interface.)
Alternatively, a second control interface can be set up later.
Note:
Template “S” and “P” buttons -
After entering information into each text box,
always click on the adjacent “
S”
button or press “
return”
to
locally save
the new setting.
Do this for each text box.
(Note: Clicking on the “
P”
button will return the setting to its preset default value).
“
S
” - Locally save new setting value (or press “return”).
“
P
” - Locally save default setting value.
Figure 56 Select “Control” Network Interface
•
Static IP Address
•
Subnet Mask
•
Default Gateway Address
•
DHCP disabled (unticked)
•
Interface Name
•
DNS IP Address, Primary and Secondary
Note:
Interface Drop-down Menu Item:
Each network interface may be renamed on this template (‘Interface Name’).
The item name that appears in the
Interface
drop-down menu list is formed from the
interface’s name and its identifier:
The form of this drop-down menu name is “name : identifier”.
For example, “Control : eno1”, “Fabric-A : ens2f0”, and “Fabric-B : ens2f1”.
