MV-805 IP Multiviewer User Manual
Power Supply Units
Unit Hardware 4.5
Issue1 Revision 1
Page 37
© 2018 SAM
4.5 Power Supply Units
The MV-805 chassis has two hot-pluggable, redundant power supply modules (PSU
modules).
Refer to third party manufacturer’s documentation for full information on the power supply
modules. See Section A.1 “COTS Hardware Platform for the Turnkey MV-805” on page 129
for third-party manufacturer information.
4.6 Fuses
There are no user-serviceable fuses in the chassis.
Note:
Connecting up the physical media “IP Fabric” interfaces:
During MV-805 unit configuration with the RollCall templates, external physical network
interfaces can be mapped to any of the internal multiviewer’s IP fabric connections.
External Physical
Network Interface
Internal Multiviewer
IP Fabric Connection
ens2f0
ens2f1
ens1f0
ens1f1
Interface 1 Fabric A
Interface 1 Fabric B
Interface 2 Fabric A
Interface 2 Fabric B
Note:
Connecting IP Fabric Network Interfaces:
Network interfaces
“ens2f0”
and
“ens2f1”
must be connected to different networks;
they must
not
be connected to the same network.
Similarly for network interfaces
“ens1f0”
and
“ens1f1”
.
Note:
Control Network Interface Connections:
However, control network interfaces
“eno1”
and
“eno2”
may
be connected to the same
network to provide a second IP address/IP port on the network, if required.
