IN001v1
Page 1 of 2
Start
Collect
and connect the Palm to the SID using the cable provided.
The main screen shows the following information:
Site
Site Number
Dump File
Name of dmp file to be created
upon Collection
Main
Main battery level
Firmware
Firmware version
Period
Survey binning interval
Config
Current survey configuration
Start
Start Time/Date of survey
End
End Time/Date of survey
Pilot
Time on Palm handheld
To Collect the data from the SID, tap
Collect
.
Tap
Setup
to enter the setup screen.
Any data on the SID must be collected before entering the set-up menu.
The
Speed Limit
can be set either by tapping on the dot-
ted line and writing on the graffiti pad, or by tapping on one
of the shortcut icons.
The
Max Display Speed
is the speed above the
Speed
Limit
beyond which the SID will display bars and no speed
information. It can be set in the same way as the
Speed
Limit
.
The
Site Number
can be set in the same way as the
Speed Limit
. Changing the
Site Number
will not affect
Collected data.
If
Synchronise Time & Date
is ticked, the time on the SID
will be set to that of the Palm.
The options available in the set-up screen will vary depending on the configuration selected.
The configurations available for the SID, and any additional options, are explained overleaf.
Clever SID
User Guide