60
parameters.
Example:
Switch#show running-config
2.2.7.1.6 show ssh-server
Command: show ssh-server
Function:
Display SSH state and users which log on currently.
Command mode:
Admin Mode
Example:
Switch#show ssh-server
ssh-server is enabled
connection version state user name
1 2.0 session started test
2.2.7.1.7 show ssh-user
Command: show ssh-user
Function:
Display the configured SSH usernames.
Parameter:
Admin Mode
Example:
Switch#show ssh-user
test
2.2.7.1.8 show startup-config
Command: show startup-config
Function:
Display the switch parameter configurations written into the Flash memory at
the current operation, those are usually also the configuration files used for the next
power-up.
Default:
If the configuration parameters read from the Flash are the same as the default
operating parameter, nothing will be displayed.
Command mode:
Admin Mode
Usage Guide:
The
show running-config
command differs from
show startup
-
config
in
that when the user finishes a set of configurations,
show running-config
displays the
added-on configurations whilst
show startup
-
config
won’t display any configurations.
However, if
write
command is executed to save the active configuration to the Flash
memory, the displays of
show running-config
and
show startup
-
config
will be the
same.
2.2.7.1.9 show interface switchport
Command: show interface switchport [ethernet <interface-list>]
Function:
Show the VLAN port mode, VLAN number and Trunk port messages of the
VLAN port mode on the switch.
Parameter: <interface-list>
is the port number or port list, which could be any port