68
2.2.9.3 System Log Configuration Example
Example 1
:When managing VLAN the IPv4 address of the switch is 100.100.100.1, and
the IPv4 address of the remote log server is 100.100.100.5. It is required to send the
log information with a severity equal to or higher than warnings to this log server and
save in the log record equipment local1
Configuration procedure:
Switch(Config)#interface Ethernet 0
Switch(Config-Ethernet0)#ip address 100.100.100.1 255.255.255.0
Switch(Config-Ethernet0)#exit
Switch(Config)#logging 100.100.100.5 facility local1 level warnings
Example 2
:When managing VLAN the IPv6 address of the switch is 3ffe:506::1, and the
IPv4 address of the remote log server is 3ffe:506::4. It is required to send the log
information with a severity equal to or higher than critical to this log server and save the
log in the record equipment local7.
Configuration procedure
Switch(Config)#interface Ethernet 0
Switch(Config-Ethernet0)#ipv6 address 3ffe:506::1/64
Switch(Config-Ethernet0)#exit
Switch(Config)#logging 3ffe:506::4 facility local7 level warnings
2.3 Configurate Switch IP Addresses
All Ethernet ports of ES4700 series is default to Data Link layer ports and perform
layer 2 forwarding. VLAN interface represent a Layer 3 interface function , which can be
assigned an IP address, which is also the IP address of the switch. All VLAN interface
related configuration commands can be configured under VLAN Mode. ES4700 series
provides three IP address configuration methods:
&
Manual
&
BootP
&
DHCP
Manual configuration of IP address is assign an IP address manually for the switch.
In BootP/DHCP mode, the switch operates as a BootP/DHCP client, send broadcast
packets of BootPRequest to the BootP/DHCP servers, and the BootP/DHCP servers
assign the address on receiving the request. In addition, ES4700 series can act as a
