858
Command switch for cluster 1234
Total number of members: 6
Status: 3 Inactive
Time since last status change: 20 hours,30 minutes,15 seconds
Heartbeat interval: 8 seconds
Heartbeat hold-time: 80 seconds
Cluster's snmp rw community string:public
23.5.1.2 show cluster members
Command: show cluster members
Function:
Display the statistic information of the joined members on the switch
Command Mode:
Admin Mode
Usage Guide:
Executing this command on the switch will display the information of the
joined member switches such as member ID, MAC address, equipment name and type,
status (UP/DOWN)
23.5.1.3 show cluster candidates
Command: show cluster candidates
Function:
Display the statistic information of the candidate member switches on the
command switch
Command Mode:
Admin Mode
Usage Guide:
Executing this command on the switch will display the information of the
candidate member switches such as member ID, MAC address, IP address, equipment
name and type
23.5.1.4 debug cluster packets
Command: debug cluster packets {register |build |heartbeat } {in|out}
no cluster packets {register|build |heartbeat } {in|out}
Function:
Enable the debugging message of cluster admin receiving and sending
packets; the “no” form of this command disables the enabled debugging messages
Parameter: Register
displays a register packet of cluster administration.
Build
displays
join a cluster or delete packet from the cluster administration.
Heartbeat
packet for check
if cluster admin members are working properly;
in
parameter displays the debugging
messages related to the command or member switches receiving packets;
out
parameter
displays the debugging messages related to the command or member switches sending
packets
Command Mode:
Admin Mode
