142
shutdown
no shutdown
Enables/Disables specified ports
name <string>
no name
Names or cancels the name of specified
ports
mdi { auto | across | normal }
no mdi
Sets the cable type for the specified port
(This command is not supported on the
ES4700 series line card ports of 1000MB
and above)
speed-duplex {auto | force10-half |
force10-full | force100-half |
force100-full | { {force1g-half |
force1g-full} [nonegotiate [master |
slave]] } }
Sets port speed and duplex mode of
100/1000Base-TX ports. The “no” format
of this command restores the default
setting, i.e., negotiates speed and duplex
mode automatically.
negotiation {on|off}
Enables/Disables the auto-negotiation
function of 1000Base-T ports.
rate-limit<bandwidth> {input|output}
no rate-limit {input|output}
Sets or cancels the bandwidth used for
incoming/outgoing traffic for specified ports
flow control
no flow control
Enables/Disables traffic control function for
specified ports
loopback
no loopback
Enables/Disables loopback test function
for specified ports
rate-suppression {dlf | broadcast |
multicast} <packets>
Enables the storm control function for
broadcasts, multicasts and unicasts with
unknown destinations (short for
broadcast), and sets the allowed
broadcast packet number; the “no” format
of this command disables the broadcast
storm control function.
4.2.1.2 Command for Network Port Configuration
4.2.1.2.1 combo-forced-mode
Command:combo-forced-mode {copper-forced | copper-preferred-auto | sfp-forced
| sfp-preferred-auto }
no combo-forced-mode
Function:
Sets to combo port mode (combo ports only); the “
no combo-forced-mode
”
command restores to default combo mode for combo ports, i.e., fiber ports first.
Parameters:
copper-forced
forces use of copper cable ports;
copper-preferred-auto