160
control and receiving data packet with 100M.
4.6.4 Vlan interface configuration
Click Port configuration, vlan interface configuration to open the VLAN port configuration
management list to allocate IP address and mask on L3 port and so on.
4.6.5 Allocate IP address for L3 port
Click “Port configuration”, “vlan interface configuration”, Allocate IP address for L3 port to
allocate IP address for L3 port. 2. This setup contains the following characteristics:
z
Port: L3 port
z
Port IP address: IP address for L3 port
z
Port network mask
z
Port status
z
Operation type: add/delete address
Example: Assign Port as Vlan10, port IP address as 192.168.1.180, Port network mask
as 255.255.255.0, Port status as no shutdown, Operation type selection as Add address
then click Apply button and this set up will be applied to the switch.
4.6.6 L3 port IP addr mode configuration
Click”Port configuration”, “vlan interface configuration”, “L3 port IP addr mode
configuration” to set up L3 port IP address mode configuration.
z
Port: L3 port
IP mode: Specifies the Ip address, meaning users need to set up L3 IP address manually.
Bootp-client means to gain an IP address and gateway address through BootP.
dhcp-client means to gain IP address and gateway address through DHCP. Click the
apply button and this setup will be applied to the switch.
