130
2.10.4.2 Show vlan port property
Users should click “Switch basic configuration”, “Basic configuration debug” and “show
switchport interface” to enter into the configuration page and make configuration nodes.
“Port” means the port table.
Example: User finds a VLAN port’s properties by choosing port1/1 and click “Apply.”
2.10.4.3 Others
Other parts are easier to configure. Users just click a configuration node and the relating
messages will appear.
Example:
to display the clock:
to display FLASH files:
2.10.5 Basic introduction to switch
Users should click “Switch basic configuration” and “Switch basic information” to enter
into the configuration page and make configuration nodes
Words and phrases are explained in the following:
z
Device type-type of device
z
Software version-the number/version of software
z
Hardware version-the number/version of hardware
z
Prompt-prompts of command-line interface
