406
passive-interface<ifname>
no passive-interface<ifname>
Block the RIP broadcast on specified pot and
the RIP data packet is only transmittable
among Layer 3 switch configured with
neighbor. the
no passive-interface<ifname>
command cancels the function
（
2
）
Configure RIP route parameters
1
）
configure route introduction (default route metric, configure routes of the other
protocols to be introduced in RIP)
Command Explanation
Router configuration mode
default-metric <value>
no default-metric
Sets the default route metric for route to be
introduced; the “
no default-metric
” command
restores the default setting.
redistribute {kernel |connected|
static| ospf| isis| bgp}
[metric<value>] [route-map<word>]
no redistribute {kernel |connected|
static| ospf| isis| bgp}
[metric<value>] [route-map<word>]
Redistribute the routes distributed in other
routing protocols into the RIP data packet; the
no redistribute {kernel |connected| static|
ospf| isis| bgp} [metric<value>]
[route-map<word>]
command cancels the
distributed route of corresponding protocols
default-information originate
no default-information originate
Generate a default route to the RIP protocol;
the
no default-information originate
command cancels the feature.
2
）
Configure interface authentication mode and password
Command Explanation
Interface configuration mode
ip rip authentication mode { text|
md5}
no ip rip authentication mode [text|
md5]
Sets the authentication method; the
no ip rip
authentication mode [text| md5]
command
cancels the authentication action
ip rip authentication string <text>
no ip rip authentication string
Sets the authentication key; the
no ip rip
authentication string
command means no
key is needed.
ip rip authentication key
<name-of-chain>
no ip rip authentication key
[
<name-of-chain>
]
Sets the key chain used in authentication, the
no ip rip authentication key
[
<name-of-chain>
] command means the key
chain is not used
