632
ip pim rp-candidate { vlan <
vlan-id >| <ifname>}
[<A.B.C.D/M>][<priority>]
(no) ip pim rp-candidate
This command is the global candidate RP
configuration command, which is used to
configure the information of PIM-SM
candidate RP so that it can compete for RP
router with other candidate RPs. The “
no ip
pim rp-candidate
” command cancels the
configuration of RP.
3)
Configure Static RP
Command Explanation
Global Mode
ip pim rp-address <A.B.C.D>
[<A.B.C.D/M>]
no ip pim rp-address <A.B.C.D>
{<all>|<A.B.C.D/M>}
This command is the global candidate RP
configuration command, which is used to
configure the information of PIM-SM
candidate RP so that it can compete for RP
router with other candidate RPs. The “
no ip
pim rp-address <A.B.C.D>
{<all>|<A.B.C.D/M>}
” command cancels the
configuration of RP.
3.Disable PIM-SM Protocol
Command Explanation
Interface Configuration Mode
no ip pim sparse-mode | no ip
pim multicast-routing
no ip pim sparse-mode | no ip
pim multicast-routing (Global
Mode)
Disable PIM-SM Protocol.
17.3.3 Command For PIM-SM
17.3.3.1 ip pim accept-register
Command: ip pim accept-register list <list-number>
no ip pim accept-register
Function:
Filter the specified multicast group and multicast address.
Parameter:
<
list-number
>: is the access-list number ,it ranges from 100 to 199.
Default:
Permit the multicast registers from any sources to any groups.
