33
parameter record is found.
This command is not exist in current
mode
The command is recognized, but this command
can not be used under current mode.
Please configure precursor
command "*" at first !
The command is recognized, but the
prerequisite command has not been configured.
syntax error : missing '"' before the
end of command line!
Quotation marks are not used in pairs.
1.2.7 Fuzzy match support
ES4700 series Shell support fuzzy match in searching command and keyword. Shell
will recognize commands or keywords correctly if the entered string causes no conflict.
For example:
1. For command “show interfaces status ethernet 1/1”, typing “sh in status e 1/1” will
work
2. However, for command “show running-config”, the system will report a “> Ambiguous
command!” error if only “show r” is entered, as Shell is unable to tell whether it is
“show rom” or “show running-config”. Therefore, Shell will only recognize the
command if “sh ru” is entered.
1.3 Web Management
1.3.1 Main Page
ES4700 series routing switch provides HTTP web management function and users
can configure and monitor the status of the switch through the web interface.
To manage the switch through web browser use the following steps:
Configure valid IP address, mask and confirm gateway for the switch.
1. Configure web user management and its password
2. Connect to the switch using the web browser. Enter the username and password to
proceed to web management.
1.3.2 Module Front Panel
When entering username, password and passing authentication, you will see the
following web management main page. On the left of the management page is the main
