75
“ command deletes configured secure
address.
snmp-server SecurityIP enable
snmp-server SecurityIP disable
Enable or disable secure IP address check
function on the NMS.
4. Configure engine ID
Command
Explanation
snmp-server engineid < engine-string >
no snmp-server engineid <
engine-string >
Configure the local engine
ID
on the
switch. This command is used for
SNMP
v3
5.
Configure user
Command
Explanation
snmp-server user <user-string>
<group-string> [[encrypted] {auth
{md5|sha} <password-string>}]
no snmp-server user <user-string>
<group-string>
Add a user to a
SNMP
group. This
command is used to configure USM for
SNMP v3
.
6.
Configure group
Command
Explanation
snmp-server group <group-string>
{NoauthNopriv|AuthNopriv|AuthPriv}
[[read <read-string>] [write
<write-string>] [notify <notify-string>]]
no snmp-server group <group-string>
{NoauthNopriv|AuthNopriv|AuthPriv}
Set the group information on the switch.
This command is used to configure
VACM
for
SNMP v3
.
7. Configure view
Command
Explanation
snmp-server view <view-string>
<oid-string> {include|exclude}
no snmp-server view <view-string>
Configure view on the switch. This
command is used for
SNMP v3
.
8.
Configuring TRAP
Command
Explanation
snmp-server enable traps
no snmp-server enable traps
Enable the switch to send Trap message.
This command is used for
SNMP v1/v2/v3.
Command: snmp-server host
{<ipv4-addr>|<ipv6-addr>}
{v1|v2c|{v3
{NoauthNopriv|AuthNopriv|AuthPriv}}}
Set the host IPv4/IPv6 address which is
used to receive SNMP Trap information.
For SNMP v1/v2, this command also
configures Trap community string; for
