62
2.2.7.1.12 show udp
Command: show udp
Function:
Display the current UDP connection status established to the switch.
Command mode:
Admin Mode
Example:
Switch#show udp
LocalAddress LocalPort ForeignAddress ForeignPort State
0.0.0.0 161 0.0.0.0 0 CLOSED
0.0.0.0 123 0.0.0.0 0 CLOSED
0.0.0.0 1985 0.0.0.0 0 CLOSED
Displayed information
Description
LocalAddress Local
address
of the udp connection.
LocalPort
Local pot number of the udp connection.
ForeignAddress
Remote address of the udp connection.
ForeignPort
Remote port number of the udp connection.
State Current
status
of the udp connection.
2.2.7.1.13 show version
Command: show version<unit>
Parameter: where the range of unit is 1
Function:
Display the switch version.
Default: The default value for <unit> is 1
Command mode:
Admin Mode
Usage Guide:
Use this command to view the version information for the switch, including
hardware version and software version. .
Example:
Switch#show ver 1
ES4700 series Device, Apr 14 2005 11: 19: 29
HardWare version is 2.0, SoftWare version packet is ES4700 series_1.1.0.0, BootRom
version is ES4700 series_1.0.4
Copyright (C) 2001-2006 by Accton Technology Corporation..
All rights reserved.
Last reboot is cold reset
Uptime is 0 weeks, 0 days, 0 hours, 28 minutes
2.2.8 Debug
All the protocols ES4700 series supports have their corresponding debug commands.
The users can use the information from debug command for troubleshooting. Debug
commands for their corresponding protocols will be introduced in the later chapters.
