LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that
this product at the time of its sale by Leviton is free of defects in materials and workmanship under
normal and proper use for five years from the purchase date. Leviton’s only obligation is to correct
such defects by repair or replacement, at its option.
For details visit
www.leviton.com or call
1-800-824-3005
. This warranty excludes and there is disclaimed liability for labor for removal of
this product or reinstallation. This warranty is void if this product is installed improperly or in an
improper environment, overloaded, misused, opened, abused, or altered in any manner, or is
not used under normal operating conditions or not in accordance with any labels or instructions.
There are no other or implied warranties of any kind, including merchantability and fitness
for a particular purpose
, but if any implied warranty is required by the applicable jurisdiction, the
duration of any such implied warranty, including merchantability and fitness for a particular purpose,
is limited to five years.
Leviton is not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss of use of, any equipment, lost
sales or profits or delay or failure to perform this warranty obligation
. The remedies provided
herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
DI-000-DW15S-02A
DI-000-DW15S-02A
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact
Leviton in writing at
Leviton Manufacturing of Canada Ltd to the attention of the Quality
Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9
or
by telephone at
1-800-405-5320.
© 2017 Leviton Mfg. Co., Inc.
© 2017 Leviton Mfg. Co., Inc.
COPYRIGHT AND TRADEMARK INFORMATION
Decora is a registered trademark and Decora Smart and My Leviton App are trademarks of
Leviton Manufacturing Co., Inc.
Use herein of third party trademarks, service marks, trade names, brand names and/
or product names are for informational purposes only, are/may be the trademarks of their
respective owners; such use is not meant to imply affiliation, sponsorship, or endorsement.
No part of this document may be reproduced, transmitted or transcribed without the express
written permission of Leviton Manufacturing Co., Inc..
TECHNICAL SUPPORT
For additional information contact Leviton’s Technical Support at:
1-800-824-3005
or visit Leviton’s website at
www.leviton.com
INSTALLATION INSTRUCTIONS
Switch with Wi-Fi
®
Technology
Cat. No.
DW15S
Universal Electronic Switch
Rated:
120/277 VAC, 60 Hz
1800W Incandescent
5A, 600W LED/CFL
15A (120 VAC) Fluorescent
8A (277 VAC) Fluorescent
15A Resistive
1/2 HP Motor
Control lights
and motor loads
from anywhere
using the
My Leviton App
Testing your Switch prior to mounting in wall box:
Switch Mounting:
TURN OFF POWER AT
CIRCUIT BREAKER OR FUSE.
• Restore power at circuit breaker or fuse.
• Press pad until locator light is OFF. Lights
should turn ON.
If lights do not turn ON, refer to the
TROUBLESHOOTING section.
Step 5
• Position all wires to provide room in outlet
wall box for switch.
• Ensure that the word "TOP" is facing up
on switch strap.
• Partially screw in mounting screws in wall
box mounting holes.
NOTE:
Dress wires with a bend as shown
in diagram in order to relieve stress when
mounting switch.
Step 6
Installation may now be completed by
tightening mounting screws into wall
box. Attach wallplate.
Restore Power:
Restore power at circuit breaker or fuse.
Installation is complete.
Step 7
NOTE:
The locator light will illuminate when the load is in the OFF position to
facilitate access in the dark.
Rocker Pad (Default settings)
Turn ON from OFF position:
Tap top of rocker – Lights turn ON.
Turn OFF from ON position:
Tap bottom of rocker – Lights turn OFF.
If there is a power outage, when the power is restored, the lights will return to
the last setting before the power interruption.
Cleaning:
Clean with a damp cloth.
DO NOT
use chemical cleaners.
OPERATION
Rocker
Locator
Light
This device complies with Part 15 of the FCC Rules. Operation is subject to
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a
Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment OFF and ON, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving Antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/tv technician for help.
FCC CAUTION
Any changes or modifications not expressly approved by Leviton Manufacturing
Co., Inc., could void the user's authority to operate the equipment.
FCC COMPLIANCE STATEMENT
IC COMPLIANCE STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
• Lights
Flickering
- Lamp has a bad connection.
-
Wires not secured firmly with wire connectors of switch or terminal screws of remote.
• Light does not turn ON and Locator LED does not turn ON
- Circuit breaker or fuse has tripped.
- Lamp is burned out.
- Neutral not wired to switch (White wire).
-
Confirm that the device is being supplied from a 120V or 277VAC, 60 Hz
source ONLY.
• Remote does not operate lights
- Ensure that total wire length does not exceed 300 ft.
- Ensure wiring is correct.
TROUBLESHOOTING
decora smart™
GETTING STARTED
Leviton Wi-Fi
®
devices use the my.Leviton.com cloud service to provide connectivity
from your mobile device when you are home or away. If this is your first Leviton Wi-Fi
®
device, use the My Leviton app or browse to my.Leviton.com and setup a free account.
CHANGING NETWORK CONFIGURATION
In situations where a wireless access point or password is changed but the configuration of
the switch needs to remain, use the following changing network procedure:
• Press and hold the paddle for 7 seconds until the Locator LED turns amber and release.
• The locator LED will flash green.
• Open the My Leviton App.
• Navigate to the device.
• On the device page select Details.
• Within the Details section choose Reconfigure Wireless and follow the app instructions.
DECORA SMART
TM
Wi-Fi
®
SETUP
FACTORY DEFAULT
In situations where a switch needs to be returned to factory default follow these steps:
• Hold the top of the paddle for a total of 14 seconds.
- After the first 7 seconds the LED turns amber.
-
Continue to hold the top of the paddle until the Locator LED quickly flashes
red/amber.
• Release the top of the paddle and the switch will reset.
Leviton Wi-Fi
®
devices are compatible with the My Leviton App and my.Leviton.com
cloud service. The app is used to pair your device with your Wi-Fi
®
network, customize
your device configuration and provide communication via my.Leviton.com. To control
the Leviton Wi-Fi
®
device it will need to be added to a Wi-Fi
®
network with Internet
access:
• Download the My Leviton App.
•
Ensure the Leviton accessory is properly wired and power is applied.
• Upon initial power-up the Locator LED will flash green to show the accessory is ready to
be configured.
• If the Locator LED is no longer flashing green when you are ready to add the accessory,
press and hold the paddle for 7 seconds until the Locator LED turns amber and release.
• Within the app follow the on screen instructions or press + to add the device to the
Wi-Fi
®
network and my.Leviton.com account.
• Leviton
Wi-Fi
®
devices support Wi-Fi
®
802.11 a/b/g/n networks @ 2.4GHz and 5GHz with
WPA or WPA2 security.
WEB
VERSION