522
Command Mode:
All modes
Usage Guide:
OSPF neighbor state can be checked by viewing the output of this
command
Example:
OSPFv3 Process (*null*)
Neighbor ID Pri State Dead Time Interface Instance ID
192.168.2.3 1 Full/Backup 00:00:29 Vlan1 0
192.168.2.1 1 Full/DR 00:00:38 Vlan2 0 Vlan1
Displayed information
Explanation
Neighbor ID
Neighbor ID
Instance ID
Instance ID
Address
IP address of neighboring layer 3 switch
Interface Interface
the neighbor belongs
State
Neighbor relationship state
Pri Priority
14.7.5.1.11 show ipv6 ospf route
Command: show ipv6 ospf [<tag>] route
Function:
Show the OSPF route table messages
Parameter: <tag>
is the processes tag, which is a character string
Default:
Not displayed
Command Mode:
All modes
Example:
Switch#show ipv6 ospf route
Codes: C - connected, D - Discard, O - OSPF, IA - OSPF inter area
E1 - OSPF external type 1, E2 - OSPF external type 2
Destination Metric
Next-hop
O 2000:1:1::/64 10
directly connected, Vlan2
O 2001:1:1::/64 10
directly connected, Vlan1
O 3000:1:1::/64 20
via fe80::203:fff:fe01:429e, Vlan2
O 3003:1:1::/64 20
via fe80::203:fff:fe01:d28, Vlan1
14.7.5.1.12 show ipv6 ospf topology
Command: show ipv6 ospf [<tag>] topology [area
<area-id>
]
