639
17.3.3.15 ip pim register-suppression
Command: ip pim register-suppression <value>
no ip pim register-suppression
Function:
This command is to configure the value of register suppression timer,the unit
is second. The “
no ip pim register-suppression
” command
restores the default value.
Parameter:
<
value
> is the timer’s value,it ranges from 1 to 65535s.
Default:
60s
Command Mode:
Global Mode
Usage Guide:
If this value is configured at DR,it’s the value of register suppression timer;
if this value is configured at RP and ipv6 pim rp-register-kat is not used at RP, this
command modifies Keepalive-period value.
Example:
Configure the value of register suppression timer to 10s.
Switch (config)#ip pim register- suppression 10
17.3.3.16 ip pim rp-address
Command: ip pim rp- address <A.B.C.D> <A.B.C.D/M>
no ip pim rp-address <A.B.C.D> [<A.B.C.D/M>|<all>]
Function:
This command is to configure static RP globally or in a multicast address
range.
The
“no ipv6 pim rp-address <A.B.C.D> [<A.B.C.D/M>|<all>]
” command
cancels static RP.
Parameter: <A.B.C.D>
is the RP address
<A.B.C.D/M>
is the expected RP
<all>
is all the range
Default:
This switch is not a RP static router.
Command Mode:
Global Mode
Usage Guide:
This command is to configure static RP globally or in a multicast address
range and configure PIM-SM static RP information. Attention, when computing rp, BSR
RP is selected first.If it dosen’t succeed, static RP is selected.
Example:
Configure vlan1 as candidate RP announcing sending interface globally.
Switch (Config)# ip pim rp-address 10.1.1.1 238.0.0.0/8
Switch (Config)#
17.3.3.17 ip pim rp-candidate
Command: ip pim rp-candidate { vlan < vlan-id >| <ifname>} [<A.B.C.D/M>]
[<priority>]
no ip pim rp-candiate
Function:
This command is the candidate RP global configure command, it is used to
