478
Command: default-information originate
[always|METRIC|METRICTYPE|ROUTEMAP]
no default-information originate
Function:
This command create a default external route to OSPF route area; the “
no
default-information originate
” closes this feature
Parameter: always:
Whether default route exist in the software or not, the default route
is always advertised.
METRIC = metric <value>:
METRIC = metric <value>:
Set the metric value for
creating default route,
<value>
ranges between 0~
16777214
, default metric value is 0
METRICTYPE = metric-type {1|2}
set the OSPF external link type of default route.
1 Set the OSPF external type 1 metric value
2 Set the OSPF external type 2 metric value
ROUTEMAP = route-map <
WORD
>
<WORD> specifies the route map name to be applied.
Default:
Default metric value is 10, default OSPF external link type is 2.
Command Mode:
OSPF protocol mode
Usage Guide:
When introducing route into OSPF route area with this command , the
system will behaves like an ASBR
Example:
Switch#config terminal
Switch(config)#router ospf 100
Switch(config-router)#default-information originate always metric 23 metric-type 2
route-map myinfo
14.6.3.41 default-metric
Command: default-metric <value>
no default-metric
Function:
The command set the default metric value of OSPF routing protocol; the “
no
default-metric
” returns to the default state.
Parameter: <value>,
metric value, ranging between 0~
16777214
Default:
Built-in, metric value auto translating
Command Mode:
OSPF protocol mode
Usage Guide:
When the default metric value makes the metric value not compatible, the
route introducing still goes through. If the metric value can not be translated, the default
value provides alternative option to carry the route introducing on. This command will
result in that all introduced route will use the same metric value. This command should be
used associating redistribute.
Example: