308
Command Mode:
Tunnel Configuration Mode
Default:
None
Usage Guide:
In configuring tunnel mode, only specifying ipv6ip indicates configuring
tunnel. Ipv6ip 6to4 indicates it is 6to4 tunnel, ipv6ip isatap indicates it is ISATAP tunnel.
Example:
Configure tunnel mode
1
、
Switch {Config-if-Tunnel1}#tunnel mode ipv6ip
2
、
Switch {Config-if-Tunnel1}#tunnel mode ipv6ip 6to4
3
、
Switch {Config-if-Tunnel1}#tunnel mode ipv6ip isatap
10.2.3.2.20 clear ipv6 neighbor
Command:clear ipv6 neighbors
Function:
.Clear the neighbor cache of IPv6.
Parameter:
None
Command Mode:
Admin Mode
Default:
None
Usage Guide:
.This command can not clear static neighbor.
Example:
Clear neighbor list.
Switch #clear ipv6 neighbors
10.2.4 IP Configuration Examples
10.2.4.1 Configuration Examples of IPv4
Fig 10-1 IPv4 configuration example
The user’s configuration requirements are: Configure IPv4 address of different
network segments on switchA and switch2, configure static routing and validate
accessibility using ping function.
Configuration Description:
1
、
Configure two vlans on SwitchA, namely, vlan1 and vlan2.
SwitchA
PC-A
PC-B
SwitchB
