320
O 2006:1::/64 via ::, Vlan1 1024
S 2008:1:2:3::/64 via fe80::250:baff:fef2:a4f4, Vlan1 1024
C 2008:2005:5:8::/64 via ::, Ethernet0 256
S 2009:1::/64 via fe80::250:baff:fef2:a4f4, Vlan1 1024
C 2022:1::/64 via ::, Ethernet0 256
O 3333:1:2:3::/64 via fe80::20c:ceff:fe13:eac1, Vlan12 1024
C 3ffe:501:ffff:1::/64 via ::, Vlan4 256
O 3ffe:501:ffff:100::/64 via ::, Vlan5 1024
O 3ffe:3240:800d:1::/64 via ::, Vlan1 1024
O 3ffe:3240:800d:2::/64 via ::, Vlan2 1024
O 3ffe:3240:800d:10::/64 via ::, Vlan12 1024
O 3ffe:3240:800d:20::/64 via fe80::20c:ceff:fe13:eac1, Vlan12 1024
C fe80::/64 via ::, Vlan1 256
C fe80::5efe:0:0/96 via ::, tunnel26 256
C ff00::/8 via ::, Vlan1 256
Displayed information
Explanation
IPv6 Routing Table
IPv6 routing table status
Codes: K - kernel route, C -
connected, S - static, R - RIP,
O - OSPF,I - IS-IS, B - BGP >
- selected route, * - FIB route,
p - stale info
Abbreviation display sign of every entry
S 2009:1::/64 via
fe80::250:baff:fef2:a4f4,
Vlan1 1024
The static router in FIB table, of which the
destination network segment is 2002::/64, via
means passing fe80::250:baff:fef2:a4f4 is the next
hop, Vlan1 is the exit interface name, 1024 is
router weight.
10.2.5.1.9 show ipv6 neighbors
Command:show ipv6 neighbors [interface-type interface-number
|
ipv6-address]
Function:
Display neighbor table entry information.
Parameter:
Parameter
interface-type interface-number
specify the lookup based on
interface name. Parameter
ipv6-address
specifies the lookup based on IPv6 address.
Default Situation:
None
Command Mode:
Admin Mode
Example:
Switch#show ipv6 neighbors
IPv6 neighbour unicast items: 14, valid: 11, matched: 11, incomplete: 0, delayed: 0,