135
Default:
not display
Command mode:
Admin Mode
Usage guide: “OK” means the power exits. “NO” means the power does not exist.
Example:
Switch# show power
----------power information----------
power1 Inserted: OK
power2 Inserted: NO
3.3.1.4 debug devsm
Command: debug devsm { send | receive | state }
no debug devsm
{
send | receive | state
}
Function:
Displays the device management packet traffic and cards status conditions.
The “
no debug devsm
{
send | receive | state
}” command disables DEBUG display.
Parameters:send
displays outgoing device management packets.
receive
displays incoming device management packets.
state
displays card status change information
Default:
Debugging information is disabled by default.
Command mode
: Admin Mode
3.4 Card Hot-Swap Operation
ES4700 series supports hot swapping of cards. Hot swapping of non-master
management cards/cards will not affect the normal operation of other line cards.
3.4.1 Card Hot-Insertion
The cards are automatically powered once inserted into the slots. A blinking RUN
indicator in 1Hz indicates the card is working normally. User entry recognition by the
switch will be stopped during the hot insertion of cards and resumed once the cards enter
normal operation mode.
3.4.2 Card Hot-Remove
