409
recv-buffer-size <size>
no recv-buffer-size
The command configures the UDP receiving
buffer size of the RIP; the
no
recv-buffer-size
command restore the
system default values
3.
Configure RIP-I/RIP-II toggling
(
1
)
Configure the RIP version to be used in all ports
Command Explanation
RIP configuration mode
version { 1 | 2 }
no version
Configure the versions of all the RIP data
packets transmitted/received by the Layer 3
switch port sending/receiving the
no version
command restores the default configuration,
version 2.
(
2
)
Configure the RIP version to send/receive in all ports
.
(
3
)
Configure whether to enable RIP packets sending/receiving for ports
Command Explanation
Interface configuration mode
ip rip send version { 1 | 1-compatible
| 2 }
no ip rip send version
Sets the version of RIP packets to send on all
interfaces; the
no ip rip send version
command set the version to the one
configured by the version command
ip rip receive version {1 | 2 | }
no ip rip receive version
Sets the version of RIP packets to receive on
all interfaces; the no action of this command
set the version to the one configured by the
version command
ip rip receive-packet
no ip rip receive-packet
Enables receiving RIP packets on the
interface; the
no ip rip receive-packet
command close data receiving on this
interface
ip rip send-packet
no ip rip send-packet
Enables sending RIP packets on the
interface; the “
no ip rip send-packet
”
command disables sending RIP packets on
the interface
4. Delete the specified route in RIP route table
Command Explanation