Sinee A90 Series, User Manual

Page: 112 / 300

User Manual of A90 Series Inverter
112
protection
E02 :
instantaneous overcurrent
E03 :
instantaneous overvoltage
E04 :
steady-state overcurrent
E05 :
steady-state overvoltage
E06 :
Steady-state undervoltage
E07 :
input phase loss
E08 :
output phase loss
E09 :
inverter overload
E10 :
inverter overheat protection
E11 :
Parameter setting conflict
E13 :
motor overload
E14 :
external fault
E15 :
inverter memory failure
E16 :
communication abnormality
E17 :
Temperature sensor
abnormality
E18 :
disengaged soft start relay
E19 :
current detection circuit
abnormality
E20 :
stall failure
E21 :
PID feedback disconnection
E22 :
retention
E24 :
parameter identification
abnormality
E25 :
retention
E26 :
off-load protection
E27 :
up to the cumulative
power-on time
E28 :
up to the cumulative running
time
F19.01
Output frequency in
failure
0.00 to upper frequency limit Hz 0.00 ×
F19.02
Output current in
failure
0.00 to 650.00 (rated power of
motor: ≤ 75 kW)
0.0 to 6500.0 (rated power of
motor: > 75 kW)
A 0.00 ×
F19.03 Bus voltage in failure 0 - 1200 V 0 ×
F19.04
Running status in
failure
0: not running
1: forward acceleration
2: reverse acceleration
3: forward deceleration
4: reverse deceleration
0 ×