manualshive.com logo in svg

Siemens Synco 700 RMS705B, Basic Documentation, Page: 42 / 213

Share
Download
Siemens Synco 700 RMS705B Basic Documentation Download Page 42

6 Data 

acquisition 

6.1 

Trend 

6.1.1 

Connections and application 

 

 

Trend

 

 

  Use the Trend function block for time-related recording of measured values. It 

provides 4 independent trend channels. 

Purpose 

  A trend channel can record 

one 

measured value. 

  Two trend channels can be displayed for each Trend view:  

Primary channel and extra channel (as reference). 

  It is possible to record signals from local inputs of RMS705B as well as room 

temperatures and outside temperature via bus. 

 
 

6.1.2 

Views 

 

The following illustration shows a 24-hour view on the operator unit with primary 
trend curve and reference curve for an extra channel: 

Example 

 

 

 

Contents 

  The current 24-hour views (8 minutes, 8 hours, 24 hours) show the date and the 

current value of the primary trend curve. 

  The primary trend curve is shown as a solid line, the reference curve as a dotted 

line. 

  The Y-axis label refers to the settings of the primary channel. If the Y-axes of the 

two channels do not match, a warning symbol appears next to the axis. 

 
Use the press-and-turn button on the operator unit to navigate between the four 
different views:  

Change between views 

  8-minute view: 

Sampling every 5 seconds, last 8 minutes. 

  8-hour view: 

Sampling every 5 minutes, last 8 hours. 

  24-hour view: 

Sampling every 15 minutes, current day. 

  Rolling over the last 6 days: Sampling every 15 minutes, last 6 days. 

 
The 24-hour view shows the last 6 days. 

Note 

 

 

43 / 216 

Siemens 

Switching and monitoring device RMS705B 

CE1P3124en 

Building Technologies Data 

acquisition 

01.04.2010 

Summary of Contents for Synco 700 RMS705B






















































































































































































































Reviews:

No comments