manualshive.com logo in svg

Siemens Synco 700 RMS705B, Basic Documentation, Page: 22 / 213

Share
Download
Siemens Synco 700 RMS705B Basic Documentation Download Page 22

4 General 

settings 

4.1 

Time and date 

4.1.1 

Mode of operation 

 

The RMS705B has a yearly clock with time, weekday and date. 

Yearly clock 

 

Two selectable time 
formats 

The following time formats are available: 

24 h

: 

 The 

date

 is displayed as dd.mm.yyyy (day.month.year). 

Example: 01.01.2010 

 The 

time

 is displayed as hh:mm (hours:minutes). 

Example: 15:56 

am/pm

: 

 The 

date

 is displayed as mm/dd/yy (month/day/year). 

Example: 05/31/06 

 The 

time

 is displayed as hh:mm am/pm (hours:minutes am/pm). 

Example: 03:56 PM 

 

  Main menu > Commissioning > Settings > .... 

or 

  

Main menu > Settings > Device >

 

Setting values 

Operating line 

Range 

Factory setting 

Time format 

24 hours,  
12 hours (am/pm) 

24 h 

 

  Main menu > Time of day/date > 

Operating line 

Range 

Factory setting 

Time of day 

00:00...24:00 

00:00 

Date 01.01...31.12 

01.01 

Year 2000...2080 Current 

 

Changeover from daylight saving to standard time and vice-versa is automatic as 
per the set values.  

Daylight 
saving/standard time 
changeover 

The dates of the earliest changeover can be adjusted in case of corresponding 
standard changes.  
 

  Main menu > Time of day/date > 

Setting values 

Operating line 

Range 

Factory setting 

Summer time start 

01.01. … 31.12 

25.03 

Winter time start 

01.01. … 31.12 

25.10 

 

Notes 

  The dates set for changeover from standard to daylight saving time, or vice 

versa, ensure that on the first Sunday after that date the time changes from 
02:00 (standard time) to 03:00 (daylight saving time), and from 03:00 (daylight 
saving time) to 02:00 (standard time). 

  If both dates are set to the same date, daylight saving/standard time changeover 

does not work. 

 

 

23 / 216 

Siemens 

Switching and monitoring device RMS705B 

CE1P3124en 

Building Technologies 

General settings 

01.04.2010 

Summary of Contents for Synco 700 RMS705B






















































































































































































































Reviews:

No comments