3 S y s t e m C o n t r o l s
3 - 3 6
[ 1 ] I N S T R U C T I O N S F O R U S E
Transmit Power LCD Selections
You can access the transmit power LCD selections by rotating the
FUNCTION SELECT
control on the LCD panel to highlight the
Tx
tab on
the LCD.
Rotate the
SELECT-R
control clockwise to select
|
Tx Power
×
and
increase a setting or counterclockwise to select
|
Tx Power
Ø
and
decrease a setting.
Note:
Pressing the
SELECT-R
control toggles the
|
Tx Power
×
LCD selection with the
|
Tx Power
Ø
LCD selection.
LCD Selection
Description
Settings
|
Tx Power
×
Increases the transmit power level and the
corresponding acoustic pressure delivered
through the transducer to the patient
.
0 dB to –20 dB or
100% to 10%
|
Tx Power
Ø
Decreases the transmit power level and
the corresponding acoustic pressure
delivered through the transducer to
the patient.
0 dB to –24 dB or
100% to 6%
Summary of Contents for SONOLINE G50
