Siemens SONOLINE G50, Instructions For Use Manual, Page: 115 / 229

3 S y s t e m C o n t r o l s
3 - 5 8
[ 1 ] I N S T R U C T I O N S F O R U S E
Wall Motion Scoring Mode Selections
ƒ
Stress Echo
Button in
Wall Motion
Scoring Mode
Selection Description
Shuffle Mode Displays the view with the selected (highlighted) label for the phase
with the selected (highlighted) label.
This button is available only when the Display Selected Loops button
is disabled.
Shuffle back Displays the previous view when that view is not deselected.
This button is available only when the Display Selected Loops button
is disabled.
Shuffle
forward Displays the next view when that view is not deselected.
This button is available only when the Display Selected Loops button
is disabled.
Display
Selected Loops Displays the selected phases side by side for each selected view.
This button is available only when the Shuffle Mode button is disabled.
X, 1, 2, 3, 4... Designates the score to be used for assignment when you select a
portion of the WMS graphic. The numbers displayed correspond to the
WMS Type selected in the Maintenance dialog box.
Selected Loop
Normal Assigns the "Normal" score to the selected view.
All Visible
Loops Normal Assigns the "Normal" score to all displayed views.
Toggle Display Toggles placement of views with placement of WMS graphics. At first
selection, the system displays the views (reduced in size) on the lower
right of the screen and displays the corresponding WMS graphics
(magnified) on the review section of the screen. At second selection,
the system displays the views and WMS graphics in their original sizes
and locations.
Enter WMS
Comment Displays the WMS Comment dialog box and then saves the entered
text to the WMS-Report .
LV Mode Selections
ƒ
Stress Echo
Button in
LV Mode
Selection Description
Delete Contour Erase the last trace line created.
Enter LV
Comment Displays the LV Function Comment dialog box and then saves the
entered text to the LV-Report .