Siemens SONOLINE G50, Instructions For Use Manual, Page: 160 / 229

4 S y s t e m S e t u p
[ 1 ] I N S T R U C T I O N S F O R U S E
4 - 1 7
Connecting and Disconnecting Transducers
Caution: Ensure that the system is in freeze before connecting and
disconnecting transducers. If a transducer is disconnected before the image is
frozen, the system will display an error message, and it will be necessary to reset
the system before continued use.
You can connect multiple transducers to the ultrasound system, with one
transducer being the
active
transducer. Press the TRANSDUCER key on
the control panel to activate an LCD display of the names of the transducers
currently connected to the system.
Example of transducer ports.
1
The port for standard and specialty transducers is included with the SONOLINE G60 S
system. It is an option with the SONOLINE G50 system
2
Available for the SONOLINE G60 S system only
3
Available for the SONOLINE G50 system only
1 Two 260-pin ports
for standard array
transducers
2 One 260-pin port for
standard and specialty
array transducers
1
3 Continuous Wave (CW)
Doppler port for
CW Doppler pencil
transducers
2
4 One optional mechanical
sector port for mechanical
sector transducers
3