5 B e g i n n i n g a n E x a m i n a t i o n
5 - 1 4
[ 1 ] I N S T R U C T I O N S F O R U S E
Editing Patient Data
You can edit entries on the
Patient Data
form at any time during the
patient examination.
Note:
The
ID LIST
button located on the
New Patient Data
form is not available on the
Patient Data
form. All other fields are identical for the two forms.
To display the Patient Data form:
1. Press the
F3
function key on the keyboard or the
PATIENT DATA
key
on the control panel.
The system displays the
Patient Data
form.
2. Use the keyboard to update your entries.
Changes to the
Patient Data
form are also updated on the image
screen and in the report for exams with a patient report.
Changes to fields used in calculations cause the system to update
previously measured results.
3. Roll the trackball to the
OK
button and then press the
SET
key to save
the revisions to the patient information and redisplay the image screen.
To restore the current
Patient Data
form and redisplay the image
screen without saving the revisions, roll the trackball to the
Cancel
button and then press the
SET
key.
Summary of Contents for SONOLINE G50
