
3 S y s t e m C o n t r o l s
[ 1 ] I N S T R U C T I O N S F O R U S E
3 - 5 7
Select Mode Selections
Stress Echo
Note:
For a continuous stage, the
Home
,
To Left
,
To Right
, and
End
buttons display
loops saved for the stage (not the view).
Note:
For a continuous stage, the
Scroll Up
and
Scroll Down
buttons display the
preferred loop for the view. If no loop is designated as preferred for the selected view,
then these buttons have no effect.
Button in Select Mode
Selection
Description
Scroll Up
Displays loops in the previous view.
Scroll Down
Displays loops in the next view.
Home
Selects the first loop in the currently displayed view.
To Left
Selects the previous loop in the currently
displayed view.
To Right
Selects the next loop in the currently displayed view.
End
Selects the last loop in the currently displayed view.
Review Mode Selections
Stress Echo
Button in Review Mode
Selection
Description
Shuffle Mode
Displays the view with the selected (highlighted) label
for the phase with the selected (highlighted) label.
This button is available only when the
Display Selected Loops
button is disabled.
Shuffle back
Displays the previous view when that view is
not deselected.
This button is available only when the
Display Selected Loops
button is disabled.
Shuffle forward
Displays the next view when that view is
not deselected.
This button is available only when the
Display Selected Loops
button is disabled.
Display
Selected Loops
Displays the selected phases side by side for each
selected view.
This button is available only when the
Shuffle Mode
button is disabled.
Summary of Contents for SONOLINE G50
