Siemens SONOLINE G50, Instructions For Use Manual, Page: 136 / 229

3 S y s t e m C o n t r o l s
[ 1 ] I N S T R U C T I O N S F O R U S E
3 - 7 9
Volume Toolbar Selection Description Icon
Step Through
Steps through the volume, using the coronal slice (the red slice
quadrant). Roll the trackball up or to the left to step toward the
back of the volume. Roll the trackball down or to the right to step
toward the front of the volume.
Toggle Toggles Shift with Step Through .
Front Cut Plane Enables/disables the front cut plane function for removing data
from the volume.
Note: This selection is not available for the Planes rendering method.
Bubble Clip Enables/disables the bubble clip function for removing data from
the volume.
When the bubble clip function is enabled using a toolbar, the
following selections are also available for resizing the ellipsoid
shape:
ƒ
Bubble Clip Resize X, Y Axes
ƒ
Bubble Clip Resize Z Axis
Box Clip Enables/disables the box clip function for removing data from
the volume.
Box Clip Plane Selects and then repositions a box clip plane for removing data
from the volume.
Note: This function is available only when Box Clip is selected.
Scalpel Displays a scalpel icon for drawing a freeform shape around data
to be removed from or kept within the volume.
Note: After data is removed, the system automatically creates a new
volume of interest (VOI) from the remaining data.
Note: This selection is not available for the Planes rendering method.
New VOI Creates a new volume of interest (VOI) from the displayed
volume data.
Note: This function is available only after data has been removed
from the volume using at least one of the following selections:
Front Cut Plane , Bubble Clip , Box Clip .
Undo Cancels the last operation performed.