Siemens SONOLINE G50, Instructions For Use Manual, Page: 75 / 229

3 S y s t e m C o n t r o l s
3 - 1 8
[ 1 ] I N S T R U C T I O N S F O R U S E
Image Parameter Controls
Use the image parameter controls to acquire and view an image.
DGC
Increases or decreases the received gain for the depth of view. The receiver
gain range is depth-dependent for the active transducer frequency.
The system can display a graphic representing the DGC curve on the
image screen.
Use the system presets to select the length of time that the DGC graphic
displays on the image screen. The
2D control also affects system gain.
Transducer
Displays a listing on the LCD of all transducers connected to the system.
The name of the active transducer is highlighted on the LCD and is
displayed in the upper left of the image screen. Use the LCD keys to select
a transducer.
MultiHertz
Changes the transmit frequency of an active multi-frequency transducer in
all modes.
During real-time imaging in 2D-mode, MULTIHERTZ changes the transmit
frequency for 2D-mode imaging. When using Color or Doppler,
MULTIHERTZ affects the transmit frequency for Color or Doppler.
Push the MULTIHERTZ control to cycle through the available frequencies.
Pushing the control up increases the frequency, and pushing the control
down decreases the frequency.
F4
Display
Ź
DGC Curve
Display
General
Ź
DGC Invert with
Image Invert
DGC Control.
Transducer
MultiHertz