Operate
6.2 Parameter description
SITRANS P500 with HART
76
Operating Instructions, 12/2014, A5E02344528-09
"1.1.7.3 Mass Flow Unit"
Factory setting:
kg/s
Adjustment range:
g/s, g/min, g/h, kg/s, kg/min, kg/h, kg/day, MetTon/min, MetTon/h, Met-
Ton/day, lb/s, lb/min, lb/day, ShTon/min, ShTon/h, ShTon/day, LTon/h,
LTon/day
Purpose:
Selection of the unit for the mass flow measurement type
Description:
This parameter allows you to select the unit for the mass flow measurement
type. The parameters associated with this unit are automatically converted
into the new unit.
"1.1.7.4 Mass Flow LRV"
Factory setting:
0 kg/s
Adjustment range:
Freely selectable numeric value
Purpose:
Setting the start of scale value
Description:
This parameter allows the start of scale value for the mass flow scaling to be
set. The value that is set for "1.1.3.1.2 Setting LRV" (Page 69) or "1.1.3.2.2
Set LRV with Pressure" (Page 70) is automatically assigned to this value.
The start of scale value is expressed in the units you selected under "1.1.7.3
Mass Flow Unit" (Page 76).
"1.1.7.5 Mass Flow URV"
Factory setting:
100 kg/s
Adjustment range:
Freely selectable numeric value
Purpose:
Setting the full scale value
Description:
This parameter allows the full scale value for the mass flow scaling to be
set. The value that is set for "1.1.3.1.3 Setting URV" (Page 70) or "1.1.3.2.3
Set URV with Pressure" (Page 71) is automatically assigned to this value.
You can enter the end of scale value in the unit selected under "1.1.7.3
Mass Flow Unit" (Page 76).
"1.1.8 Level"
Note
This menu item is only visible if "Level" was selected in "1.1.2 PV Select" (Page 69).
See also
Measuring mode "Level" (Page 145)
Summary of Contents for SITRANS P500
Page 1: ......
Page 2: ......
Page 10: ...Table of contents SITRANS P500 with HART 10 Operating Instructions 12 2014 A5E02344528 09 ...
Page 238: ......