Operate
6.2 Parameter description
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
99
"2.1.9.2 User LRV"
Factory setting:
0
Adjustment range:
Freely selectable numeric value
Purpose:
Setting the start of scale value
Description:
This parameter allows the start of scale value for the user scaling to be set.
The value that is set for "2.1.2.1.2 Setting LRV" (Page 84) or "2.1.2.2.2 Set
LRV with Pressure" (Page 85) is automatically assigned to this value.
The start of scale value is expressed in the units you selected under "2.1.9.1
User Curve Unit" (Page 98).
"2.1.9.3 User URV"
Factory setting:
100
Adjustment range:
Freely selectable numeric value
Purpose:
Setting the full scale value
Description:
This parameter allows the full scale value for the user scaling to be set. The
value that is set for "2.1.2.1.3 Setting URV" (Page 84) or "2.1.2.2.3 Set URV
with Pressure" (Page 85) is automatically assigned to this value.
The full scale value is expressed in the units you selected under "2.1.9.1
User Curve Unit" (Page 98).
"2.1.9.4 Activate User Curve"
The description of this parameter and the following ones can be found under:
"1.1.11.4 User Curve" (Page 82)
"2.1.10 Temperature Unit"
Factory setting:
°C
Setting range:
°C, °F
Purpose:
Selection of the unit for the temperature indication
Description:
This parameter allows you to select the unit for the temperature display.
"2.1.11 Static Pressure Unit"
Factory setting:
bar
Setting range:
inH
2
O, inHg, ftH
2
O, mmH
2
O, mmHg, psi, bar, mbar, g/cm
2
, kg/cm
2
, Pa, kPa,
Torr, atm, MPa, inH
2
O (4 °C), mmH
2
O (4 °C)
Purpose:
Selection of the unit for the static pressure
Description:
This parameter allows you to select the unit for the static pressure.
Summary of Contents for SITRANS P500
Page 1: ......
Page 2: ......
Page 10: ...Table of contents SITRANS P500 with HART 10 Operating Instructions 12 2014 A5E02344528 09 ...
Page 238: ......