Operate
6.2 Parameter description
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
115
"2.5.3.7 Mass Flow Unit"
Factory setting:
kg/s
Adjustment range:
g/s, g/min, g/h, kg/s, kg/min, kg/h, kg/day, MetTon/min, MetTon/h, Met-
Ton/day, lb/s, lb/min, lb/day, ShTon/min, ShTon/h, ShTon/day, LTon/h,
LTon/day
Purpose:
Selection of the unit for the mass flow measurement type
Description:
You can change the unit for the measured value display locally.
"2.5.3.8 Static Pressure Unit"
Factory setting:
bar
Setting range:
inH
2
O, inHg, ftH
2
O, mmH
2
O, mmHg, psi, bar, mbar, g/cm
2
, kg/cm
2
, Pa, kPa,
Torr, atm, MPa, inH
2
O (4 °C), mmH
2
O (4 °C)
Purpose:
Selection of the unit for the static pressure
Description:
You can change the unit for the measured value display locally.
"2.5.3.9 Temperature Unit"
Factory setting:
°C
Setting range:
°C, °F
Purpose:
Selection of the unit for the temperature indication
Description:
You can change the unit for the measured value display locally.
"2.5.4 4. Display Value"
"2.5.4.1 Selection"
Factory setting:
Off
Adjustment range:
Depending on the PV, further selection options are displayed.
see below.
Purpose:
Selection of the fourth measured value indicated on the display
Description:
This parameter allows a fourth measured value to be indicated, depending
on the selected measuring mode.
To do this, select a measured value for display from the offered selection in
the "4th display value" menu.
The measured value display will then display the "1st display value", with
the optionally selected 2nd to 4th values alternately below.
If you do not want to display the 4th measured value, please turn off the 4th
measured value at this point.
Summary of Contents for SITRANS P500
Page 1: ......
Page 2: ......
Page 10: ...Table of contents SITRANS P500 with HART 10 Operating Instructions 12 2014 A5E02344528 09 ...
Page 238: ......