Operate
6.2 Parameter description
SITRANS P500 with HART
90
Operating Instructions, 12/2014, A5E02344528-09
"2.1.4.19 Density Unit"
Factory setting:
g/cm
3
Adjustment range:
g/cm
3
, kg/m
3
, lb/Gal, lb/ft
3
, g/ml, kg/l, g/l, lb/in
3
, ug/l, ug/m
3
Purpose:
Selection of the unit for the density parameter
Description:
This parameter allows you to select the unit for the measured density value.
"2.1.4.20 Density"
Factory setting:
1 g/cm
3
Adjustment range:
Freely selectable numeric value
Purpose:
Setting the value for the density
Description:
This parameter allows you to set the value for the density of the medium,
which is used for conversion between volume and mass.
Adjust the settings for the measurement range when you change the values
for density!
"2.1.5 Mass Flow"
Note
This menu command is visible only if "mass flow"" has been selected under "2.1.1 PV
See also
"Mass flow" measurement type (Page 151)
"2.1.5.1 Bidirectional Flow Activation"
Factory setting:
Off
Adjustment range:
•
Off
•
On
Summary of Contents for SITRANS P500
Page 1: ......
Page 2: ......
Page 10: ...Table of contents SITRANS P500 with HART 10 Operating Instructions 12 2014 A5E02344528 09 ...
Page 238: ......