Operate
6.2 Parameter description
SITRANS P500 with HART
114
Operating Instructions, 12/2014, A5E02344528-09
"2.5.3.2 Pressure Unit"
Factory setting:
mbar
Setting range:
inH
2
O, inHg, ftH
2
O, mmH
2
O, mmHg, psi, bar, mbar, g/cm
2
, kg/cm
2
, Pa, kPa,
HPa, Torr, atm, MPa, inH
2
O (4 °C), mmH
2
O (4 °C)
Purpose:
Selection of the unit for the pressure parameter
Description:
You can change the unit for the measured value display locally.
"2.5.3.3 Level Unit"
Factory setting:
m
Adjustment range:
ft, m, inch, cm, mm
Purpose:
Selection of the unit for the level measurement type
Description:
You can change the unit for the measured value display locally.
"2.5.3.4 Volume Unit"
Factory setting:
m
3
Adjustment range:
l, ImpGal, m
3
, bbl, Bushel, yd
3
, ft
3
, in
3
, bbl(fl.), Nm
3
, Nl, Stdft
3
, hl
Purpose:
Selection of the unit for the volume measurement type
Description:
You can change the unit for the measured value display locally.
"2.5.3.5 Mass Unit"
Factory setting:
kg
Setting range:
g, kg, MetTon, lb, ShTon, LTon, ounce
Purpose:
Selection of the unit for the mass measurement type
Description:
You can change the unit for the measured value display locally.
"2.5.3.6 Volume Flow Unit"
Factory setting:
m
3
/h
Adjustment range:
Gal/min, l/min, ImpGal/min, Gal/s, Mgal/day, l/s, Miol/day, m
3
/s, m
3
/h,
m
3
/day, ImpGal/h, ImpGal/day, Nm
3
/h, Nl/h, ft
3
/s, ft
3
/min, ft
3
/h, ft
3
/day, bbl/s,
bbl/min, bbl/h, bbl/day, Gal/h, ImpGal/s, l/h, Gal/day
Purpose:
Selection of the unit for the volume flow measurement type
Description:
You can change the unit for the measured value display locally.
Summary of Contents for SITRANS P500
Page 1: ......
Page 2: ......
Page 10: ...Table of contents SITRANS P500 with HART 10 Operating Instructions 12 2014 A5E02344528 09 ...
Page 238: ......