manualshive.com logo in svg

Siemens SICAM 7KG85X, Manual, Page: 213 / 281

Share
Download
Siemens SICAM 7KG85X Manual Download Page 213

Softkey Functions

F1

F2

F3

F4

Exiting edit mode

Increasing the displayed value or switching forward in
the parameter list in edit mode
Reducing the displayed value or switching backward in
the parameter list in edit mode
Switchover the sign

Switching between selected and non-selected state (for
example, password protection on → password protec-
tion off)

Table 9-4

Icons in the Title Bar of the Display

Icon

Definition

The device is password-protected.

The device password was entered correctly and the device is unlocked.

Starting Operation

Before starting the device, the following preconditions must be met:

•

Mount the device as described in chapter 

9.3 Assembly

.

•

Connect the lines for measurement, communication and supply voltage as described in the chapters

9.5 Electrical Connection

, 

9.7 Communication Connections

, 

9.8 Binary Connections

 and observe the

safety notes.

•

Switch on the devices needed for the measurement.

•

Switch on the supply voltage of the device.

•

Check whether the LEDs indicate that the device is ready (see chapter 

10.1.3 LED Indications

).

Once the device is initialized, the currently selected screen with the measured values is displayed.

i

i

NOTE

The following figures only show the display without the front view of the device.

9.10.2

Commissioning and First Steps
9.10 Operation via Display

212

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Reviews:

No comments