manualshive.com logo in svg

Siemens SICAM 7KG85X, Manual, Page: 74 / 281

Share
Download
Siemens SICAM 7KG85X Manual Download Page 74

SNMP

i

i

NOTE

The SNMP protocol is implemented in SICAM P850/P855 in order to be able to retrieve manufacturer-
specific information.
To retrieve information via SNMP, an MIB browser and the SICAM P.mib file are required. The MIB browser
allows the displaying of SNMP information objects and their content.

To download the SNMP device MIB file, proceed as follows:

•

Select yes in the Enable SNMP option (see 

Figure 2-26

.

•

In the Communication Ethernet input/output window, click Download SNMP device MIB file.

•

The File Download dialog opens.

[sc_download_MIB_file, 1, en_US]

Figure 2-34

File Download Dialog Box

•

Click Save.
The Save As dialog opens and you can save the SICAM P.mib file in any folder and use it in an MIB
browser.

Basic Functions

2.6 Ethernet Communication

SICAM, SICAM P850/P855 7KG85X, Manual

73

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Reviews:

No comments