Siemens SICAM 7KG85X Manual Download Page 155

Page: 155 / 281

Display and Display Settings

Function Description

In the Configuration tab, you can view and edit the display settings under the HMI menu. The menu includes
2 parts:

•

Display settings

•

User-defined screen

Configuration via Web Pages

Configuration of Display Settings

To configure the display settings in the Configuration tab, proceed as follows:

•

In the navigation window, click Display settings.

[sc_display_settings, 1, en_US]

Figure 7-1

Configuration Tab, Display Settings

•

Configure the respective parameters according to the following table.

Table 7-1

Settings for Display

Parameter

Default Setting

Setting Range

Contrast

0 to 10

Time until dimmed

1 min to 99 min

Refresh time

1000

330 ms to 3000 ms

Inverse display

No
Yes

Phase label

(L1, L2, L3)

(L1, L2, L3)
(a, b, c)

•

After the parameterization, click Send.

•

In the navigation window, click Activation and cancel.

7.1

7.1.1

7.1.2

Display and Other Functions
7.1 Display and Display Settings

154

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Search results

Summary of Contents for SICAM 7KG85X

Reviews:

Siemens SICAM 7KG85X, Manual, Page: 155 / 281

Search results

Summary of Contents for SICAM 7KG85X

Reviews: