manualshive.com logo in svg

Siemens SICAM 7KG85X, Manual, Page: 86 / 281

Share
Download
Siemens SICAM 7KG85X Manual Download Page 86

Binary Outputs

Function Description

The device has 2 binary outputs.
Binary outputs are issued as indications.
4 Operating modes are possible:

•

Persistent

•

Persistent with fail safe

•

Pulse

•

Pulse with retrigger

Persistent

The binary output has the status ON or OFF. If the indication becomes invalid, the binary output continues to
maintain its current status.

[dw_persistent, 1, en_US]

Figure 3-1

Persistent

Persistent with Fail Safe

If the indication becomes invalid, the binary output switches into the OFF state if Source inverted = no, or it
switches into the ON state if Source inverted = yes.

[dw_persistent-with-fail-save, 1, en_US]

Figure 3-2

Persistent with Fail Safe

3.2

3.2.1

Process Connections

3.2 Binary Outputs

SICAM, SICAM P850/P855 7KG85X, Manual

85

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Reviews:

No comments