manualshive.com logo in svg

Siemens SICAM 7KG85X, Manual, Page: 68 / 281

Share
Download
Siemens SICAM 7KG85X Manual Download Page 68

Parameter

Default Setting

Setting Range

Keep alive time

10 s

0 s = switch off
1 s to 65 535 s

Communication supervision
time

600 (* 100 ms)

0 s = none
100 ms to 6 553 400 ms

i

i

NOTE

The 2 port numbers must be different from each other.

•

After the parameterization, click Send.

•

In the navigation window, click Activation and cancel.

•

Enter the activation password (refer to 

Table 2-3

).

•

Click Activation.

Number of Connections (not configurable)

Up to 5 TCP connections are possible:

•

Without user-defined port 1: 4 connections via the standard port 502

•

With user-defined port 1: 2 connections via the standard pot 502 and 2 connections via the configured
port number

Configuration via Display

Submenu Modbus TCP Settings

The operation is carried out with the softkeys F1 to F4.

[dw_p85x_display_communication_Modbus_TCP, 1, en_US]

Figure 2-29

Submenu Communication via Modbus TCP

Diagnosis of the Modbus TCP

The diagnosis for the Modbus TCP allows analyzing parameters and communication as well as resetting the
diagnostic counters.

i

i

NOTE

The diagnostic data of Modbus TCP are displayed only if the bus protocol has been selected in the tab
Configuration → Basic configuration → Communication Ethernet.
If the protocol has not been selected, the Diagnosis Modbus TCP window displays -none-.

For the diagnosis of the protocol Modbus TCP in the Maintenance tab, proceed as follows:

•

In the navigation window, click Modbus.
The Modbus window opens and the Modbus TCP protocol is displayed. For Modbus TCP the Standard
server, the User-port server and the Connection data are analyzed.

2.6.2.2

2.6.2.3

Basic Functions

2.6 Ethernet Communication

SICAM, SICAM P850/P855 7KG85X, Manual

67

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Reviews:

No comments