Siemens SICAM 7KG85X Manual Download Page 173

Page: 173 / 281

•

Select the multiple files in the Record list.

[sc_multiple_file_download, 1, en_US]

Figure 7-22

Value View Tab, Multiple File Download

•

Click Download.
The download progress is indicated and the selected files are stored in the specified directory.

[sc_download_progress, 2, en_US]

Figure 7-23

Status of the Download Progress

•

Once the download is finished, check the files.

Visualizing Downloaded Files

You can display the transmitted data of records with the following programs:

•

SIGRA: COMTRADE files

•

PQDiffractor: PQDIF files

For more information on the programs, contact the Siemens Hotline.

Display and Other Functions
7.3 File Download

172

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Search results

Summary of Contents for SICAM 7KG85X

Reviews:

Siemens SICAM 7KG85X, Manual, Page: 173 / 281

Search results

Summary of Contents for SICAM 7KG85X

Reviews: