manualshive.com logo in svg

Siemens SICAM 7KG85X, Manual, Page: 195 / 281

Share
Download
Siemens SICAM 7KG85X Manual Download Page 195

[dw_DIN_rail_mounting, 1, --_--]

Figure 9-3

Assembly of the DIN Rail Device

(1)

DIN rail

(2)

Snap-on clip

(3)

Guiding of the snap-on clip

(4)

Release device

(5)

Pulling direction

•

Pull down the release device at the snap-on clip and hold it in this position.

•

Slide the device with the guiding of the snap-on clip on to one side of the DIN rail.

•

Move the device into the desired position on the DIN rail.

•

Release the release device. The device is now firmly mounted on the DIN rail.

The snap-on clip is set to a certain height position by default. To change the height position, proceed as
follows:

•

Lever the release device out of its guiding (no special tool required).

•

Move the release device into the desired position.

•

Press the release device back into its guiding.

i

i

NOTE

The assembly instructions above must be carried out correctly to ensure sufficient protection against
touching live parts.

UL-Certification Conditions

Field wires of control circuits can be separated from other circuits with respect to the end-use requirements.

Commissioning and First Steps
9.3 Assembly

194

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Reviews:

No comments