manualshive.com logo in svg

Siemens SICAM 7KG85X, Manual, Page: 35 / 281

Share
Download
Siemens SICAM 7KG85X Manual Download Page 35

Table 2-1

Settings for Device and Language

Parameter

Default Setting

Setting Range

Device name

DEVICE

Max. 31 ASCII characters

Language

English (US)

ENGLISH (US)
User language according to User language preselec-
tion:
DEUTSCH (DE) or
CHINESE (CN)

Date/time format

YYYY-MM-DD, time with
24 hours

YYYY-MM-DD, time with 24 hours
YYYY-MM-DD, time 12 h AM/PM
DD-MM-YYYY, time with 24 hours
DD-MM-YYYY, time 12 h AM/PM
MM/DD/YYYY, time with 24 hours
MM/DD/YYYY, time 12 h AM/PM

•

After the parameterization, click Send.

•

In the navigation window, click Activation and cancel.

•

Enter the activation password (refer to 

Table 2-3

).

•

Click Activation.

Configuration of the User Language Preselection

i

i

NOTE

The user language can be preset, for example when starting the user interface for the first time. DEUTSCH
(DE) is set by default.

Basic Functions
2.2 Device and Language

34

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Reviews:

No comments