manualshive.com logo in svg

Siemens SICAM 7KG85X, Manual, Page: 183 / 281

Share
Download
Siemens SICAM 7KG85X Manual Download Page 183

Connection with SICAM PAS/PQS (V8.08 and Higher)

General

The data acquired by the device are stored on the SD card. The data of the measured-value recorder, for
example mean values, and of the trend recorder are available in the PQDIF data format. The data of the wave-
form recorder are saved in the COMTRADE data format. This data can be transferred to the SICAM PAS/PQS
using the IEC 61850 Ed.2 protocol.
The SICAM PAS/PQS software, version V8.08 (available as of October 2016) and higher allows importing the
data into the SICAM PAS/PQS archive. Once the data has been transferred into the SICAM PAS/PQS archive, it
can be used for the further evaluation and reporting, export, etc.
The SICAM PQ Analyzer allows visualizing of the archived data as well as the result of the evaluation and
reporting. For example, evaluations of the records and reports can be performed according to the EN 50160
standard (only SICAM P855) or other grid codes.
The following diagram shows the sequence of the configuration and the analysis:

[dw_workflow-p85x-settings-for-SICAM_PQS, 1, en_US]

i

i

NOTE

You can find more information about SICAM PAS/PQS in the manual SICAM PAS, Overview, order number
E50417-X8976-C431-B3 and under 

http://w3.siemens.com/smartgrid/global/en/products-systems-solutions/

substation-automation/substation-automation/pages/sicam-pas.aspx

.

8.1

8.1.1

System Functions
8.1 Connection with SICAM PAS/PQS (V8.08 and Higher)

182

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Reviews:

No comments