Siemens SICAM 7KG85X, Manual, Page: 225 / 281

Message Logs Menu – Operational Log
The Message Logs menu contains operational indications registered and saved by the device during opera-
tion. The device can save up to 128 operational indications. When the storage capacity is exceeded, the oldest
indications will be overwritten successively.
To show the operational indications, proceed as follows:
•
In the navigation window, click Operational log:
[sc_Operational_log, 2, en_US]
Figure 9-29 Information Tab, Operational Log
i
i
NOTE
The chapter 2.8.2 Viewing and Clearing of Message Logs explains how to delete the operational indica-
tions manually.
Get Default Configuration
i
i
NOTE
The device contains 2 sets of parameters. The set of parameters currently used for device operations is the
active set of parameters. The inactive set of parameters is called the passive set of parameters.
If you have not changed the settings of the parameters since the first start of the device, you use the default
settings.
If you have changed the settings of the parameters, and need to get the default configuration that is set at the
factory, proceed as follows:
•
In the navigation window of the Configuration tab, click Get default configuration.
9.11.2.9
Commissioning and First Steps
9.11 Operation via PC
224 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022