manualshive.com logo in svg

Siemens SICAM 7KG85X, Manual, Page: 170 / 281

Share
Download
Siemens SICAM 7KG85X Manual Download Page 170

•

Click Download.
The download progress is indicated and the selected files are stored in the specified directory.

[sc_download_progress, 1, en_US]

Figure 7-19

Status of the Download Progress

•

Once the download is finished, check the files.

Visualizing Downloaded Files

You can display the transmitted recorder data with the following programs:

•

SIGRA: COMTRADE files

•

SIGRAPlugin: HTML data of the event recorder and the recorder values on the recorder page

•

PQDiffractor: PQDIF files

For more information on the programs, contact the Siemens Hotline.

Multiple File Download via Microsoft Edge

The screenshots related with Microsoft Edge in this chapter are taken from Microsoft Edge version
87.0.664.75 (Official build) (64‑bit).

7.3.5

Display and Other Functions

7.3 File Download

SICAM, SICAM P850/P855 7KG85X, Manual

169

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Reviews:

No comments